Belkin F5D7330 Network Guide

F5D7330
Peer to Peer
Before you begin, make sure the Ad-hoc network is set-up on the computer with the Internet
connection and that Internet connection sharing is enabled. Once the connection has been
established the IP addresses will be automatically assigned.
If you configure the unit to be an Ad-hok device then other devices will be able to scan to
find it and then connect to it
Run the CD, select the device from the list, then select the Ad-Hoc option
Enter the SSID of the network. Adapter name is not important.
Channel number
also needs to
match the
network.

Belkin F5D7330 Specifications

General

Brand	Belkin
Model	F5D7330
Category	Adapter
Language	English