Belkin F5D8236-4 PM01123 User Manual

LAN
WAN
Setup CD
1
4
3
3
2
2
1
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows is either a registered trademark
or trademark of Microsoft Corporation in the United States and/or other countries. Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.
F5D8236-4 • PM01123
1. Unplug your existing modem’s power supply.
Find the cable connecting your modem and computer.
Unplug it from the modem and plug it into the gray port
on the Belkin Router.
If you are replacing an existing router, find the cable
connecting the computer and old router. Disconnect it from
the old router and plug it into the gray port on the new router.
2. Connect the new cable (provided in the box) to the yellow
port on the Router. Plug the other end into the modem.
N WIRELESS ROUTER Quick Installation Guide
3. Plug in your modem’s power supply. Wait 60 seconds for the
modem to start up.
Plug the Router’s power supply into a wall outlet, and the
other end into the black port on the Belkin Router.
As the Router wakes up, lights will come on; recheck your
connections if the “router” and the “wired” lights are not a
steady blue after 20 seconds.
4. Locate the CD in this guide an d insert it into your computer.
The Setup Assistant should appear automatically.
If it doesn’t, open the CD in My Computer (Windows
®
)
or the Finder (Mac OS
®
X) and double-click on the
“Setup Assistant” icon.

Belkin F5D8236-4 PM01123 Specifications

General

Model	F5D8236-4
Product Type	Wireless Router
Wireless Standards	802.11b/g/n
Wireless Speed	Up to 300 Mbps
Frequency Band	2.4 GHz
Security	WEP, WPA, WPA2
Ethernet Ports	4 x 10/100 Mbps
Antennas	2 x External Antennas

Summary

Belkin N Wireless Router Setup Guide

Prepare Modem and Router Connections

Unplug existing modem power, connect cable to router's gray port. Replace old router if applicable.

Connect Router to Modem

Connect the new cable from the yellow port on the router to the modem.

Power Up Network Devices

Plug in modem power, wait 60 seconds. Plug in router power and check indicator lights.

Install Setup Assistant Software

Insert the CD into your computer and run the Setup Assistant automatically or manually.

Belkin Wireless Router Technical Support

Troubleshooting and Setup Assistant

Retry setup steps 1-4 before contacting support; the assistant helps diagnose common problems.

Contacting Belkin Support by Region

Find web and phone support details for the United States, Canada, and Mexico.