Wireless G Plus MIMO
USB Network Adapter
Quick Installation Guide
for Apple
®
Insert CD andInsert CD and
run installerrun installer
Setup OverviewSetup Overview
Finish installer, Finish installer,
restart computerrestart computer
Insert Adapter intoInsert Adapter into
activate the Adapteractivate the Adapter
Run utility, connect toRun utility, connect to
a wireless networka wireless network
Step 1 – Insert CD and run installer
Insert the setup disc into your Mac computer’s CD
drive. When the CD icon appears, click on it.
Click on the folder for your Mac OS
®
version. Then,
click on the “.pkg” file to start installation.
Step 2 – Finish installer,
restart computer
Follow the installer instruction. Select a destination
volume to install.
Enter your password when prompted. Then, click
“Restart” to finish installing the software.
To Next Page
Need help?
General
