Belkin F9K1015au User Manual

User Manual
F9K1015au 8820-01863 Rev. A00
N300
PLUG-IN Wi-Fi
®
RANGE EXTENDER

Belkin F9K1015au Specifications

General

Model	F9K1015au
Category	Extender
Wireless Standard	802.11n
Frequency Band	2.4 GHz
Maximum Speed	300 Mbps
Security	WPA, WPA2

Summary

Getting Started with Your Range Extender

Initial Setup Guide

Wireless Setup Procedure

Step-by-step instructions for wirelessly connecting and setting up the range extender.

Advanced Settings for Your Range Extender

Connecting to the Web Interface

Logging into the Firmware

Configuring the 2.4GHz Wireless Connection

Guides on changing settings for the range extender's connection to the main 2.4GHz network.

Extended Network and SSID Settings

Configure extended network, SSID, network name, broadcast SSID, protected mode, and QoS.

Security Settings Configuration

Change wireless security settings like WPA2/WPA or WEP.

Wi-Fi Protected Setup (WPS) Guide

Learn how to use WPS for automatic network setup and security.

Resetting and Updating Your Range Extender

Restarting the Range Extender

Restoring Factory Defaults

Updating Firmware via Web Interface

Troubleshooting, Support, and Warranty Information

Troubleshooting Setup and Connection Issues

Resolve issues like setup not finding the extender or connection problems.

Addressing Network Performance Problems

Using the Reset Button for Troubleshooting