EasyManuals Logo

Belkin Firewire 800 3-port PCI card User Manual

Belkin Firewire 800 3-port PCI card
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Preface
The Belkin Firewire 800 3-port PCI card is fully
functional IEEE 1394b Controller card, which
supports Data Transfer Rate up to 800Mbps.
It is compliant with OHCI specifi cation Revision
1.0 and protocol enhancement as defi ned in
P1394a draft 2.0.
Features:
Easy plug-n-play connectivity and set-up
IEEE 1394b data transfer rate up to 800 Mbps
12V Power Input for 1394b Bus Power support
up to 15 Watts per port
Supports Windows 98SE, ME, 2000, XP,
and MAC OS
System Requirement:
PC:
1394b and 1394a functionality (800Mbps and
400Mbps) is supported in Windows 98SE,
Windows ME, Windows 2000 and Windows XP
Macintosh
®
:
1394b functionality (800Mbps) requires Mac
OS X v 10.3 or higher
1394a functionality (400Mbps) is supported in
Mac OS 9 or higher
Installation:
1 Hardware Installation
1. Turn off the computer, unplug the power cord,
disconnect all peripheral devices and remove
the system cover.
2. Take the PCI card out of its anti-static bag and
push it into the fi rst empty PCI slot.
3. Reconnect all peripheral devices, install the
system cover and plug in the power cord.
2 Driver Setup
Turn on your computer and place the driver CD
in your CD-ROM. The driver will be installed
automatically.
English English
Installation :
1 installation du matériel
1. Éteignez l’ordinateur, débranchez le
câble d’alimentation, débranchez tous
les périphériques et retirez le capot de
l’ordinateur.
2. Retirez la Carte PCI de son sac antistatique et
insérez-la dans un emplacement PCI libre.
3. Rebranchez les périphériques, replacez le
capot et branchez le câble d’alimentation.
2 Installation du pilote
Allumez votre ordinateur et placez le CD
contenant le pilote dans votre lecteur de CD-
ROM. Le pilote s’installe automatiquement.
Préface
La Carte PCI FireWire 800 à 3 Ports est une carte
contrôleur IEEE 1394b entièrement fonctionnelle
et prend en charge un débit allant jusqu’à 800
Mbps. Conforme à la Révision 1.0 de l’OHCI
et l’optimisation du protocole tel que défi ni à
P1394a ébauche 2.0.
Caractéristiques :
Installation et connectivité sans souci grâce au
Plug-and-Play
Débit de données IEEE 1394b jusqu’à 800
Mbps
Puissance en entrée de 12 V pour alimentation
par le bus 1394b, jusqu’à 15 W par port
Prise en charge de Windows 98SE, Me, 2000
XP et MAC OS
Confi guration Requise :
PC :
Les fonctionnalités 1394b et 1394a (800
Mbps et 400 Mbps) sont prises en charge par
Windows 98 SE, Me, 2000 et XP
Macintosh
®
:
La fonctionnalité 1394b (800 Mbps) nécessite
Mac OS X v. 10.3 ou supérieur
La fonctionnalité 1394a (4000 Mbps) est prise
en charge par Mac OS 9 ou supérieur
Français Français
Einleitung
Die Belkin Firewire 800 3-Port PCI-Karte ist
eine PCI-Karte, die dem IEEE-Standard 1394b
entspricht und Datenraten von bis zu 800
Mbit/s ermöglicht. Sie entspricht den OHCI-
Spezifi kationen (Rev. 1.0) und verfügt über eine
Verbesserung des Protokolls entsprechend
P1394a (vorläufi ger Standard 2.0).
Merkmale:
Einfache Anwendung und Installation durch
Plug&Play
Datenübertragungsraten von bis zu 800 Mbit/s
entsprechend dem IEEE-Standard 1394b
12 V Eingangsspannung für busgespeiste
Stromversorgung (IEEE-Standard 1394b); 15
Watt an jedem Anschluss
Unterstützt Windows 98SE, ME, 2000, XP und
MAC OS
Systemanforderungen:
PC:
Unterstützung des Standards 1394b und
1394a (800 Mbit/s und 400 Mbit/s) durch
Windows 98SE, Windows ME, Windows 2000
und Windows XP
Macintosh
®
:
Unterstützung des Standards 1394b (800
Mbit/s) durch das Betriebssystem Mac OS X v
10.3 oder höher
Unterstützung des Standards 1394a
(400 Mbit/s) durch das Betriebssystem
Mac OS 9 oder höher
Installation:
1 Hardware-Installation
1. Fahren Sie den Computer herunter, entfernen
Sie das Netzkabel und die Peripheriegeräte
und nehmen Sie die Abdeckung des
Computers ab.
2. Entfernen Sie die antistatische Hülle der PCI-
Karte und setzen Sie die PCI-Karte in einen
freien PCI-Steckplatz ein.
3. Schließen Sie alle Peripheriegeräte an,
befestigen Sie die Abdeckung des Computers
und schließen Sie das Netzkabel an.
2 Treibereinrichtung
Fahren Sie den Computer hoch und legen Sie die
Treiber-CD in Ihr CD-Rom-Laufwerk ein.
Der Treiber wird automatisch installiert.
Deutsch Deutsch
Firewire 800
3-port PCI card
F5U623eaAPL
Users manual
Manuel de l’utilisateur
Benutzerhandbuch
Handleiding
Manual del usuario
Manuale utente
Users manual
Manuel de l’utilisateur
Benutzerhandbuch
Handleiding
Manual del usuario
Firewire 800
3-port PCI card
© 2004 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.
P74449ea
Belkin Ltd.
Express Business Park
Shipton Way Rushden
NN10 6GL • United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk
The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin GmbH
Hanebergstrasse 2
80637 Munich
Germany
Tel: +49 (0) 89 143405 0
Fax: +49 (0) 89 143405 100
Belkin SAS
5 Rue du Petit Robinson
3ème étage
78350 Jouy en Josas • France
Tel: +33 (0) 1 34 58 14 00
Fax: +33 (0) 1 39 46 62 89
Belkin Tech Support
Europe: 00 800 223 55 460
P74449ea_F5U623eaAPL_FLD.indd 1 1/11/04 2:53:27 pm

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Belkin Firewire 800 3-port PCI card and is the answer not in the manual?

Belkin Firewire 800 3-port PCI card Specifications

General IconGeneral
InterfacePCI
Ports3
Port TypeFireWire 800 (IEEE 1394b)
Data Transfer Rate800 Mbps
CompatibilityIEEE 1394b
Operating System SupportWindows XP, Windows Vista

Related product manuals