Belkin USB 4-Port Plus Hub User Manual

Installation | 03
Important Note: Please do not connect any USB devices to the Hub until instructed to
do so in step 4 of this installation procedure.
1. Plug the AC adapter into a wall outlet or surge protector. Plug the DC connector into
the DC power jack found on the rear of the Hub.
Note: The Hub may be used without the power supply when connecting low-power
devices such as keyboards and mice.
2. Plug the flat end of the provided USB device cable into the downstream port of your
computer, or downstream port of another hub, then plug the mini-USB connector on
the device cable into the upstream port on the rear of the Hub.
Installation

Belkin USB 4-Port Plus Hub Specifications

General

Brand	Belkin
Model	USB 4-Port Plus Hub
Category	Switch
Language	English