7
EN
FR
DE
NL
ES
IT
Hardware Installation
Connecting a USB Device to the Switch
1. Connect the A-type connector of your
USB device to the A-type USB port on the
Switch.
2. Install the drivers for your USB device.
Refer to the device’s user manual for
additional information on installing the
driver.
Connecting Computers to the Switch
1. Connect the USB cable’s A-type connector
to an available USB port on your USB
computer.
2. Connect the USB cable’s B-type connector
to an available port on your Switch.
Repeat steps 1 and 2 for each additional USB
computer you wish to connect.
You are now ready to use your Belkin USB
Peripheral Switch.
To Next Page
Loading...
