Bell System BellProx PR50X - Page 3

User Instructions (If required, Press
*
to exit programming mode)
Open Door with Fob
FOB (Present Fob to reader)
Open Door with PIN
<PIN> # (eg 4052#)
Open Door with
Fob
and PIN
FOB <PIN> #
Add PIN to
Fob
User
(Mode 31 only)
* FOB 1234 # <PIN> # <PIN> #
Change PIN with
Fob
(Mode 31 only)
* FOB <Old PIN> # <New PIN> # <New PIN>
Change PIN with User ID
(mode 31 & 32)
* <User ID> # <Old PIN> # <New PIN> # <New PIN> #
Must be performed in Program Mode – see Master Code above
Door Settings
Change Lock Time
4 <Lock Time> # * Lock Time is 0-99 ( seconds)
Alarm Duration
5 <Alarm Time> # Alarm Time is 0, 1, 2, or 3 (minutes)
Enable Door open
detect
6 1 #
Requires
Door monitor switch
Disable Door open
detect
6 0 #
Ke
y
pad Lockout & Alarm Options
(10 Invalid
Fob
s or Pins within 10 mins)
Normal
7 0 #
No Alarm or lockout
Lockout
7 1 #
Keypad is locked out for 10 mins
Alarm operate
7 2 #
Alarm and ext. buzzer sound for 10 mins
LED Indication
Red, flashing
Idle
Red, solid
In Program mode
Green, brief flash
Sequence acknowledged
Green, solid
Door unlocked