Bell 206L Rotorcraft Flight Manual Supplement

Document Number
121-044-00
Page
2 of 15
Rev. 0
Bell 206L/407 Cargo Hook Kit
Rotorcraft Flight
Manual Supplement
FAA Approved
INTRODUCTION
This supplement must be attached to the appropriate Bell FAA
approved Rotorcraft Flight Manual when an Onboard Systems
200-195-00 or 200-196-00 Cargo Hook Suspension Kit is
installed in accordance with Supplemental Type Certificate
(STC) NO. SR00418SE. The information contained herein
supplements or supersedes the basic manual only in those areas
listed herein. For limitations, procedures and performance
information not contained in this supplement, consult the basic
Rotorcraft Flight Manual and Rotorcraft Flight Manual
Supplement – Cargo Hook issued by Bell Helicopter.
The 200-195-00 and 200-196-00 Cargo Hook Suspension Kits
include the cargo hook, suspension beam assembly, and pillow
blocks. The suspension beam assembly supports the cargo
hook and allows it to align itself with a load. The pillow
blocks support each end of the suspension beam assembly and
attach to the rotorcraft’s hard points. In addition the kits
include the external manual release cable and external
electrical harness. These items interface with the fixed cargo
hook provisions on the rotorcraft.
The 200-196-00 kit includes a load weigh system. The load
weigh system consists of a cockpit-mounted indicator, a load
cell above the cargo hook, and the interconnecting wiring
harness.

Bell 206L Specifications

General

Brand	Bell
Model	206L
Category	Toy
Language	English