Bell 206L4 - Page 48

5-00-00
Page 12 Rev. 13 25 FEB 2011
BHT-206L4-MM-1
ECCN EAR99
Mast Assembly 206-040-014-103 TB 206L-99-195 X X X
206-040-014-107 TB 206L-99-195 X X
Main Driveshaft Assembly (Grease Lubricated)
206-040-015-011 ASB 206L-93-91 X 206-040-015-015 ASB 206L-93-91 X X
Freewheel Assembly 206-040-270-117 TB 206L-01-205 X
206-040-270-123 TB 206L-01-205 X X
Riveted Aft Short Shaft 206-040-383-101 TB 206L-02-207 X X Riveted Tail Rotor Driveshaft Assembly
206-040-387-101 TB 206L-02-207 206-040-370-107/-109/
-115 are acceptable fielded substitutes for 206-040-387-101.
XXXX X
Tail Rotor Gearbox Assembly
206-040-402-111 TB 206L-99-197 206-040-402-101/-107
are acceptable fielded substitutes for 206-040-402-111.
XXXX X
Oil Cooler Blower Impeller
206-061-432-109 ASB 206L-86-40 X X X X X
Main Driveshaft Assembly (KAflex)
206-340-300-105 ASB 206L-01-123
TB 206L-01-204
206-340-300-105M is an acceptable fielded substitute for 206-340-300-105.
XX
Freewheel Assembly 406-040-500-113
with TB 206L-02-208 and ASB 206L-07-147 accomplished.
TB 206L-01-205 X X
Table 5-3. 300-Hour Airframe Progressive or 300-Hour Airframe Periodic Inspection Program Prerequisites (Cont)
NOMENCLATURE PART NUMBER
BULLETIN
REFERENCE
ACCEPTABLE
ALTERNATES
206L 206L1 206L3 206L4
206L1+
AND
206L3+
IGW
UPGRADE
2