Page 1-39
Installation and Setup
Aligning The Dish
Remote
Buttons Menu Options
4. Press the Menu button to open the
Main Menu.
5. Select the System Setup option.
6. Select the Installation option.
7. Select the Point Dish and Signal
Strength option.
You will now see the Point Dish and Signal Strength menu.
8. You must now enter the correct number transponder. Use your cursor controls to
enter no.11 in the transponder box on the screen.
9. Now you are ready to carry out the alignment of your dish.
Avoid positioning yourself directly in front of the satellite antenna while
aiming it, as your body may block much or all of the satellite signal.
To Next Page
Loading...
Need help?
General
