Bella BLA14467 - User Manual

PLEASE READ INSTRUCTIONS PROVIDED IN THE
INSTRUCTION MANUAL. This is only a quick starter guide.
6 QT. PRESSURE COOKER
Gasket
Aluminum
cover
1. Ensure that gasket is secured around
aluminum cover (1a) & attach to hous-
ing lid (1b).
2. Turn the lid clockwise to UNLOCK
position to open the lid and place the
ingredients in the pot (2a).
3. Lock the lid by turning counter clock-
wise to LOCK position (2b) and set
pressure release valve to PRESSURE
position (3).
4. Press the setting button once (4a) or
twice (4b) & the corresponding light
will indicate the selected setting.
The default time (4c) can be manually
changed using the “+” and “-” buttons.
As a safety feature, the lid cannot be
opened when cooking is in process.
5. Pressure build up takes few minutes
during which the display will have an
animation to indicate this process.
6. Animation will stop after pressure is
created & the default time will begin to
count down.
7. After cooking is complete you will
hear a beep & the display will show
the depicted graphic.
8. Use an oven mitt or a towel to turn
the pressure release valve to the
PRESSURE RELEASE position and
let the steam escape (8a). Turn lid
clockwise to the UNLOCK position
to open (8b).
1X
2X
Pressure
Release
Turn
to open
1a
2a
4a
8a
4b
8b
1b
2b 3
4c
5 6
7
Turn
to close
Turn
to open

Summary

6 QT. Pressure Cooker Operation Guide

Lid Preparation and Sealing

Ensure gasket is secured, attach lid, turn clockwise to unlock, then counter-clockwise to lock and set valve to PRESSURE.

Setting Cooking Parameters

Press setting button to select, use +/- to adjust default time. Lid cannot open during cooking.

Cooking Process Indicators

Display shows animation for pressure build-up, then counts down the set time.

Post-Cooking Procedures

Listen for beep, check display, turn valve to PRESSURE RELEASE, then turn lid to UNLOCK to open.

Bella BLA14467 Specifications