9
7. Processing blades, processing cups and lids are all top-rack ONLY dishwasher safe.
IMPORTANT: After dishwashing, always check to make sure the gasket seal in the base of the blade collar
is properly in place, as the heat from some dishwashers may cause them to become loose.
8. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
GASKET RING REPLACEMENT
• If the gasket ring breaks or visibly deteriorates, remove the old
gasket ring from the base of the blending blade of your
Personal Blender.
• Remove the replacement gasket ring from the bag and wash it
with warm soapy water, then pat it dry. Make sure the seal ring is
completely dry before replacing it.
• Make sure that the at surface of the replacement gasket ring is
facing downward; while the rounded side of the replacement seal
is facing upwards.
• WARNING: Be careful to not touch the blades. Press the seal ring
rmly into place, until it is properly installed into the base of either
the blending blade.
STORAGE INSTRUCTIONS
1. Unplug and clean unit.
2. Store in original box or in a clean, dry place.
3. Never store Personal Blender while it is hot or plugged in.
4. Never wrap cord tightly around the appliance. Never place any stress on cord, especially where the cord
enters the unit, as this could cause the cord to fray and break.
Gasket ring
Flat side needs to face the bottom
12120_KSmith_8 Piece Personal Blender_IM_V5_R3.indd 912120_KSmith_8 Piece Personal Blender_IM_V5_R3.indd 9 2023-03-30 4:21 PM2023-03-30 4:21 PM
To Next Page
Loading...
