EasyManua.ls Logo

Belling BC60S - User Manual

Belling BC60S
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Read this manual carefully before operation
INSTRUCT ON MANUALI
COOKER HOOD
Pictures in this manual are for reference only.
For Models:
BC60S / BC60B
BC90B / BC110B

Questions and Answers

  • S
    Samuel WilliamsAug 11, 2025
    What to do if my Belling Ventilation Hood is vibrating?
    • S
      Steven BellAug 12, 2025
      If your Belling Ventilation Hood is vibrating, there could be several reasons: 1. A damaged blade can cause vibration. Consider replacing the blade. 2. The motor might not be tightly fastened. Ensure the motor is securely fastened. 3. The cooker hood itself might not be tightly fixed. Make sure the cooker hood is properly and tightly fixed.
  • R
    Rebecca GallegosAug 17, 2025
    Why is my Belling BC60S light on but the motor not working?
    • R
      Renee ReevesAug 17, 2025
      If the light is on but the motor of your Belling Ventilation Hood isn't working, it could be due to several causes: * The blades may be blocked. * The capacitor might be damaged, requiring a replacement. * The motor itself could be damaged and need replacement. * The internal wiring of the motor may be cut off or disconnected, possibly producing an unpleasant smell, which also necessitates motor replacement.
  • S
    Sean HernandezAug 23, 2025
    What to do if my Belling BC60S has insufficient suction?
    • S
      Seth GilesAug 23, 2025
      If your Belling Ventilation Hood has insufficient suction, consider the following: * The distance between the hood and the cooker top might be too large. Readjust the distance to the recommended height. * Excessive ventilation from open doors or windows can also reduce suction. You can either choose a new place to install the appliance or close some doors/windows.
  • L
    Lawrence JonesAug 29, 2025
    What to do if my Belling BC60S is leaking oil?
    • E
      Elizabeth PhillipsAug 29, 2025
      If your Belling Ventilation Hood is leaking oil: * Check if the outlet and air ventilation entrance are tightly sealed. If not, take down the outlet and seal it with glue. * Also, inspect the connection of the U-shaped section and cover for leakage. If there's leakage, take the U-shaped section down and seal it with soap or paint.
  • R
    Richard FrankSep 3, 2025
    Why is my Belling BC60S machine inclined?
    • L
      Louis AlvarezSep 3, 2025
      If your Belling Ventilation Hood is inclined, it's likely due to: * The fixing screws not being tight enough. Tighten the fixing screws to make the hood horizontal. * The hanging screws also might not be tight enough. Tighten the hanging screws to ensure the hood is level.

Belling BC60S Specifications

General IconGeneral
Width60 cm
Number of Speeds3
Number of Motors1
MaterialStainless Steel
FiltersGrease
ColourSilver

Related product manuals