Instructions for Use
8
Connection to Power Supply
Connect the appliance with the cable and plug to a suitable 13 amp socket
which is properly earthed.
Required nominal voltage and frequency are indicated on the rating plate. The
connection to the mains supply and earthing have to be made according to
current standards and regulations. The appliance resists temporary voltage
tolerance up to -15 to +10 %.
If the fitted plug is not suitable for your socket outlet, then it should be cut off
and disposed of safely in order to avoid a possible shock hazard. A suitable
plug of 13 amp or 15 amp rating should then be fitted to the cable.
The wires in the mains lead are coloured in accordance with the following
code:
BLUE NEUTRAL
BROWN LIVE
GREEN AND YELLOW EARTH
1 The GREEN AND YELLOW wire must be connected to the terminal
in the plug which is marked with the letter E or by the earth symbol
or coloured green or green and yellow.
2 The BLUE wire must be connected to the terminal which is marked
with letter N or coloured black.
3 The BROWN wire must be connected to the terminal which is
marked with the letter L or coloured red.
To Next Page
Loading...
