22
Dishwasher installation steps
●
1
2
.
3 .
4 .
5 .
6
7
8
Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer
to the temp late for positioning of the brackets.
Adjust th e tension of the door springs by using an Allen key turning in a clockw ise m otion t o
tight en the left an d righ t door springs. Failure to do this could cause dama ge to y our dishwas her
(Illustration 2)
Connect the inlet hos e to the cold wate r supply
Connect the dr ain hose. Refer to diagram (Figure 6)
Connect the po wer cord
Affix the condensation strip under the w ork surface of cabin et. Pl ease en sure the condens ation
strip is flush with edge of work surface.
Place the dishwasher into position.(Illustration 4)
Level th e dishw asher. The rear food can be a djusted from t he fro nt of the dishwasher by tu rning
the A llen sc rew in the middle of the base of dishwasher use a n Allen key (Illustra tion 5 A). To adjust
the front feet, use a flat screw driver and turn the fron t feet un til the dishw asher is level (Illustration 5B).
9 The dishwasher mus t be secured in place. The re are two w ays to do this:
A. Normal work s urface:Put th e installation hook into th e slot of the side plane and se cure it to the
work sur face with the wood screws (Illustratio n 6).
B. Marble or granite wo rk top:Fix the side with Screw. (Illustration 7 ).
【Figure 7】
To Next Page
Loading...
