Belling BEL IDW45 - Page 9

6
before usin g it for the first time.
To get the best performance from your dishwashe r, read all operatin g instructions
1.On/Off Button: To turn on/off the power supply.
3.Program Button : To Press the button to select a
wash Program.
4.Delay Button : To Press the button to delay.
5. Disp lay sc reen: to show the error c od e,delay time etc.
Delay time,Program indicators or error codes
indicator:
Half load functions indicator:
Infall Warning Light :
Being on When faucets is not opened.
Rinse Aid indicator:
Indicates when the dispenser needs to be refilled.
Add salt indicator:
Indicates when the dispenser needs to be refilled.
2.Half load functions Button: To select Half load
functions. (With this Half load function you can
only use it when you have only about or less than
6 place setting dish wave, and you will see less
water and energy consumption , can only be used
with Intensive, Normal, ECO, Glass and 90 min .)
P1 P2 P3
P4 P5 P6
P
1
2
3
4
5
7
6
11
Back View
8
Front view
Lower basket
Salt container
Dispenser
Cup shelf
Spray arms
Filter assembly
Inlet pipe connector
Drain pip eUpper basket
Cutlery rack
1
Inner pipe
5
6
7
8
9
10
11
3
2
4
9
10