12345678901
12345678901
12345678901
12345678901
12345678901
12345678901
9
GB
7
LA2505-080
Refilling of rinse aid
The rinse aid, which is released automatically dur-
ing the final phase of the wash cycle, guarantees
that the dishes dry quickly, and prevents the for-
mation of stains and calcium sediments.
Indication of salt level (if present)
The green mark under the cap indicates that there
is still enough salt in the container. If the green
mark is no longer visible, the salt container needs
to be refilled with special dishwasher salt.
8
9
LA2505-092
LA2505-096
Only use rinse aids for dishwashers. Other products won’t obtain the desired
effect.
The rinse aid container S is located on the inside
of the door.
• Remove the container cap T by turning it 1/4 revo-
lution anticlockwise.
• Fill container with rinse aid up to the broken line.
Maximum quantity: about 140 ml.
• Put the cap back in its place.
• To prevent too much foam from being produced
during the rinsing process, clean off all rinse aid
residue with a cloth.
Indication of rinse aid level
• Electric (fig. 8)
The appliance is equipped with a level indicator
for the rinse aid. When the indicator illuminates,
more rinse aid is needed.
• Mechanical (fig. 9)
More rinse aid needs to be added when the
indicator (located on the container F) is clear (
).
When the container is full, the indicator will darken
in colouration.
S
T
F
To Next Page
Loading...