How to fix a Bellini BGM604 Cooktop that is not igniting?
If your Bellini cooktop is not igniting, there could be several reasons. First, check the electricity supply. Second, make sure the burner lid is assembled correctly. Finally, ensure the gas supply is fully open.
How to fix Bellini BGM604 that is not ignited?
If your Bellini Cooktop isn't igniting, there could be a few reasons. First, ensure that there is electricity supply. Second, check if the burner lid is correctly assembled. If not, assemble it correctly. Finally, make sure the gas supply is fully open.
What to do if I smell gas from my Bellini BGM604 Cooktop?
If you smell gas from your Bellini Cooktop, it indicates a gas leakage. Immediately stop using the cooktop, close the middle valve, and open a window to ventilate the area. Contact a service center using a phone from outside the building.
Why is my Bellini BGM604 Cooktop badly ignited?
A poorly ignited Bellini Cooktop may be due to several factors. Ensure the gas supply is fully open and that the burner lid is correctly assembled. Also, check if the ignition plug is contaminated; if so, wipe it with a dry cloth. If the burners are wet, dry them carefully. Lastly, check if the holes in the flame spreader are clogged and clean them if necessary.
What to do if the flame goes out on my Bellini BGM604 Cooktop?
If the flame on your Bellini Cooktop goes out during use, it could be due to a few reasons. Check if the flame supervision device is contaminated and clean it. If food has boiled over, turn off the burner knob, wait a minute, and reignite the zone. Also, a strong draught might have blown the flame out; turn off the zone, check for draughts, wait a minute, and reignite.
Why does my Bellini BGM604 Cooktop have a yellow flame?
A yellow flame on your Bellini Cooktop could be because the holes in the flame spreader are clogged; clean the flame spreader. Alternatively, a different type of gas may be in use; check the gas type being used.
Why is my Bellini BGM604 Cooktop making noise when ignited?
If your Bellini Cooktop makes noise when combusted and ignited, it's likely that the burner lid is badly assembled. Make sure to assemble the burner lid correctly.
How to fix unstable flame on Bellini BGM604 Cooktop?
An unstable flame on your Bellini Cooktop can occur if the burner lid is badly assembled. Ensure that you assemble the burner lid correctly.
Why does the flame on my Bellini Cooktop go out during use?
The flame on your Bellini cooktop might be going out for a few reasons. The flame supervision device may be contaminated, so try cleaning it. If something has boiled over and extinguished the flame, turn off the burner knob, wait a minute, and then reignite the zone. A strong draught could also be blowing the flame out; in that case, turn off the zone and check for draughts, like open windows. Wait one minute and reignite the zone.
How to troubleshoot a Bellini Cooktop that is badly ignited?
If your Bellini cooktop is badly ignited, ensure the gas supply is fully open and that the burner lid is correctly assembled. Also, check if the ignition plug is contaminated and wipe it with a dry cloth. Make sure the burners are dry and that the holes in the flame spreader are clean.
To Next Page
General
