To Next PageTo Next PageWhy Bellman & Symfon Visit 868 does not pick up signals?
If your Bellman & Symfon Receiver isn't picking up signals, here are a few things to check: * Make sure the batteries in the transmitters are working. * Try moving the Receiver closer to the transmitter to ensure it's not too far away. * Verify that the Bellman Visit 868 Receiver is set to the same Radio Key as the other devices in your Bellman Visit 868 System.
What to do if Bellman & Symfon Receiver signals when no transmitter is activated?
If your Bellman & Symfon Receiver is signaling even when no transmitter is active, it's likely due to interference from another system nearby using the same Radio Key. To resolve this, change the Radio Key on all devices within your Bellman Visit 868 System.
General| Type | Receiver |
|---|---|
| Model | Visit 868 |
| Frequency | 868 MHz |
| Visual Signal | LED indicator |
| Vibration Signal | Yes |
| Operating Temperature | 0°C to 40°C |
| Compatibility | Bellman & Symfon transmitters |
