EasyManua.ls Logo

Bellman BE1341 - Getting Started; Unpacking, Installing and Testing the Unit; Function

Bellman BE1341
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Bellman Alarm Clock BE1341
Thank you for choosing products from Bellman & Symfon.
Bellman & Symfon AB have both separate products and also complete systems geared to helping
people with impaired hearing. An example of this is the Bellman Visit 868 System, which consists
of a number of radio transmitters and receivers. The transmitters detect different events in the
surrounding area and transmit a radio signal to the receivers. The receivers pick up this signal
and provide indications using light, sound and/or vibration.
Read through the entire user manual rst and then start to use the products.
Getting started
Unpacking, installing and testing the unit
1. Connectthepowersupplyunittothesocket(12).TheBellmanAlarmClockmustbe
connectedtomainspowerforatleast24hoursinordertooperatecorrectly.Setthe
correcttimewiththeTimeSettingKnob(11).
2. SwitchonthealarmwiththeAlarmDial(5)byturningittoposition1.Turnthealarm
pointeranticlockwiseusingtheAlarmCallKnob(10)untilthealarmontheclockis
activated.TheBellmanAlarmClockwillthenemitsoundandlightsignalsand,ifa
BE1270BellmanBed-shaker(accessory)isconnected,itwillvibrate.PresstheSnooze
Button(4).Thebackgroundlightontheclockfacewillcomeonatthesametimeasthe
alarmisswitchedoff.Thesnoozefunctiondelaysthealarmcallforapproximately3.5
minutes.TheAlarmDial(5)isswitchedtoposition0toswitchoffthealarmcompletely.
3. PlacetheBellmanAlarmClockuprightonalevelsurface.TheAlarmClockisusually
placednearthebedbutitcanalsobeplacedsomewhereelsewhereitcaneasilybeseen
andheard.YoucanalsoeasilytakeyourAlarmClockwithyouwhereveryougo.
Function
General
TheBE1341BellmanAlarmClockisanAlarmClockforindooruse,whichattractsthe
attentionoftheuserusingsoundandlightsignalsandalsovibrationifaBE1270BellmanBed-
shaker(accessory)isconnected.
Itisactivatedbytheclock’salarm,byconnectiontoanexternaltriggerinput(13)orviadirect
connectiontoatelephonesocket(15).
Clock
TheBellmanAlarmClockwillindicateanalarmcallviasound,ashandvibrationforup
to15minutesunlessthealarmisturnedofforontosnooze.Thesoundrangesacrossseveral
frequenciesandincreasesinvolumetoattractattentionbetter.

Other manuals for Bellman BE1341

Related product manuals