Bellman BE1341 - Appendix - Further Information; Signal Pattern on External Trigger

Appendix - Further information
Further information
Adjustments
Noadjustmentsapartfromsettingthetimeandselectingthecalltimearerequiredfornormaluse.
Therelevantdescriptionsareprovidedbelow,ifyouwishtochangeasettingforsomereason.
Signal pattern on external trigger
Thesignaltypesetduringexternalactivationandindicatorsandsignalsactivatedbyanexternal
triggercanbealteredusingtheswitches(8),seegurebelow.
DIP switch
settings
LED pattern Sound Vibration Flash
Greenisconstantly
lit
1xdingdong,low-
frequencytone
Separate Yes
Greenblinks
constantly
2xdingdong,high-
frequencytone
Separate Yes
Yellowisconstantly
lit
1xring,low-
frequencytone
Short Yes
Yellowblinks
constantly
2xringring,high-
frequencytone
Short Yes
Orangeblinks
constantly
Baby Rapid Yes
Orangeblinks
constantly
Baby Rapid Yes
RedandOrange
constantlyblink
VMAconstant
Long Yes
Redblinks
constantly
Firealarmconstant Long Yes