EasyManua.ls Logo

BELL+HOWELL MONSTER DOUBLE ZAPPER - Parts Identification; Charging the Unit; Plug and Play Feature; Usage Modes

Default Icon
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USAGE
CHARGING
PARTS IDENTIFICATION
Hang the unit using the metal handle, located on the top of the unit.
For optimal results, hang the Double Zapper 4 to 6 feet above the floor.
The Double Zapper needs to be fully charged.
Follow the below directions to charge the unit.
1. Remove the protective cover from the
charging port.
2. Connect Micro USB cable:
Option 1: Insert USB end into the power adapter
(not included) and the other end into the Micro
USB port on the side of the unit, then plug into
a power outlet.
Option 2: Insert Micro USB end into the Micro USB
port on the side of the unit, then plug into any USB port.
1. Protective top
2. High voltage Lamp
3. Handle
4. Base
5. ON/OFF button
6. 4 Settings:
Mosquito/Roach/Both/Heat
7. Removable tray
12
13
14
1
2
3
4
6
7
9
10
5
TO KILL MOSQUITOES AND FLYING BUGS
PRESS
1 time
Mosquitoes will fly towards the light and will die
when come in contact with the UV lamp. The unit
can operate up to 7.5 hours in this mode on a fully
charged battery.
Press the ON/OFF button once to activate the
Mosquito Mode. The indicator light will turn on
and the lamp will emit the UV light.
CAUTION: When unit is used in Mosquito Mode,
a high voltage will be produced. To reduce the
risk of injury, keep hands away from grid.
To turn the unit OFF at any time, press and hold
the ON/OFF button for 3 seconds.
HOW TO ACTIVATE
WHAT HAPPENS
8
11
8
3 4
8. Trap door (2)
9. Cover
10. Bait compartment
11. Charging port
12. Ring (for Roach/Both settings)
13. USB cord
14. Cleaning brush
3. Once plugged it, charging will start automatically. First indicator light (Mosquito)
will flash. Charging time is approximately 4 hours. When charging is complete,
the light will turn to solid.
4. When the unit needs to be charged, the Heat light will flash. Follow the Charging
directions to charge your unit.
PLUG AND PLAY FEATURE
Double Zapper can also operate continuously while plugged into outlet or any
USB source. Please refer to Charging section of the manual on previous page
to connect the unit to a power source.
CAUTION: Arrange cord away from traffic area and where it will not be
tripped over.