Need help?Do you have a question about the Belt-Way Scales Model 100 and is the answer not in the manual?
Details the voltage, current, and power ratings for the belt-way integrator and optional AC power supply.
Outlines criteria for selecting and preparing idlers for the weighbridge for accurate measurements.
Instructions on securely bolting load cell assemblies to idlers using the V-Block and proper positioning.
Emphasizes the importance of string-lining idlers for accurate weighbridge leveling and alignment.
Provides instructions on wiring scale sensors and power, including shield wire grounding for reduced interference.
Introduces the step-by-step guide for the initial setup and configuration of the integrator.
Details how to view and edit scale parameters such as run mode, idlers, load cell size, units, and angle.
Covers essential calibration methods including length/zero, test weight, and material tests for accurate scale performance.
Lists common issues related to belt speed and provides steps for diagnosing and resolving them.
Addresses power-related issues, including AC/DC power supply specifications and low power indicators.
General| Application | Conveyor Belt Weighing |
|---|---|
| Display | Digital Weight Indicator |
| Capacity | Up to 10, 000 tons per hour |
| Accuracy | ±0.5% |
| Belt Speed | Up to 1, 000 feet per minute |
| Material | Stainless Steel |
| Power Supply | 50/60 Hz |
| Units of Measurement | Tons |
To Next Page
