5 4 4
PLEASE OBSERVE THE FOLLOWING PRECAUTIONS
AND INSTRUCTIONS BEFORE INSTALLATION AND USE.
• Powered by 4 AA batteries (not included).
Make sure to install the batteries properly (+/-).
• Use a dry soft cloth to wipe the touch sensor as needed.
• The sensor window indicator will flash every 3-4 seconds when the
battery is low. Replace the batteries as needed.
• The faucet will automatically turn off when the batteries are depleted.
• Immediately check for any leaks.
• Continue to check for leaking throughout the
first hour of installation.
• If leaking occurs, turn off water supply and
discontinue use immediately.
IMPORTANT SAFEGUARDS
To Next Page
Loading...