21 20
SPECIFICATIONS
Specifications HD-7500
Power Rating
120Vac, 60Hz, 1400W
Water Supply
Water Supply Method
Direct connection to waterworks
Water Pressure Range
0.07 ~ 0.74 MPa(0.7 ~ 7.5 kgf/cm2)
Power Cord
4 feet
Wash
Device
Posterior Wash
Max. 650 cc ± 100 cc
Feminine Wash
Max. 650 cc ± 100 cc
Adjustable
Water Pressure
5 Levels
Warm Water Temp
Room Temp - Low, Normal, High
Heated
Seat
Temperature
Room Temp - Low, Normal, High
Heater
1200 W
Safety Devices
Overheating preventing fuse, Seat
heat temperature sensor
Dryer
Temperature
Room Temperature, ~131°F level 1-5
Heater
250 W
Safety Devices
Temperature fuse
Dryer
•
Eco Mode
•
Night Light
•
Inlet Water Temperature
41°F ~ 95°F ( 3°C~ 35°C )
(Recommended temp. - 50°F ~ 95°F)
Ambient Temperature
41°F ~ 104°F ( 3°C~ 40°C )
(Recommended temp. - 50°F ~ 95°F)
Dimensions
Elongated
W: 18.11 in / L : 20.47 in / H : 5.31 in
Round
W:15.43 in / L: 18.9 in / H: 5.71 in
Weight
7.9 lbs (Packaged: 11.4 lbs)
1 YEAR FULL COVERAGE WARRANTY
Bio Bidet Innovation LLC warrants its product to be free from manufacturing
defects under normal use and service for a period of one (1) year from
original date of purchase.
This warranty is extended only to the ORIGINAL PURCHASER.
• Bio Bidet Innovation LLC’s obligations under this warranty are limited to
repair or replacement, at Bio Bidet Innovation LLC’s option, of products
or parts found to be defective, provided that such products were properly
installed and used in accordance with instructions.
• Bio Bidet Innovation LLC reserves the right to make such inspections
as may be necessary in order to determine the cause of the defect.
• Bio Bidet Innovation LLC will not charge for labor or parts in connection
with warranty repairs done at Bio Bidet Innovation LLC.
• Bio Bidet Innovation LLC is not responsible for the cost of removal, return,
initial install, and/or re-installation of products.
This warranty does not apply to the following items:
• Damage or loss sustained in a natural calamity such as fire,
earthquake, flood, thunder electrical storm, etc.
• Damage or loss resulting from any unreasonable use,
misuse, abuse, negligence, or improper maintenance of the product.
• Damage or loss resulting from removal, improper repair,
or modification of the product.
• Damage or loss resulting from sediments or foreign matter
contained in a water system.
• Damage or loss resulting from improper installation or from
installation of a unit in a harsh and/or hazardous environment.
WARRANTY
To Next Page
Loading...