Setting timer
• Up to 10 different timer settings can be programmed.
• Each timer setting has its day, power-on time and power-off time.
• The maximum duration of each timer setting is 23 hours 50 minutes.
• If the power-off time of the timer setting falls on the following day, it is unnecessary to set the day-just set the
power-off time.
• Press the TIMER SET key, the timer number starts blinking (01-10).
• Press the + or – key to select a timer number.
• Press the TIMER SET key, the cursor on the left side of the day blinks.
• Press the ▲ or ▼ key to move the cursor to the corresponding day. Press the + key to add a corresponding
day, or press the - key to delete a day.
• Press the TIMER SET key to set the on time. The hour digit starts blinking.
• Press the + or – key to set the hour.
• Press the TIMER SET key. The minute digit starts blinking.
• Press the + or – key to set the minute.
• Press the TIMER SET key to set the off time. The hour digit starts blinking.
• Press the + or – key to set the hour.
• Press the TIMER SET key. The minute digit starts blinking.
• Press the + or – key to set the minute.
• Press the TIMER SET key. The temperature digit starts blinking.
• Press the + or – key to set the temperature.
• Press the TIMER SET key to continue with the timer setting or press the OK key to confirm the setting.
▪ Viewing the timer setting
• Press the TIMER SET key.
• Press the + or – key to check the power-on time of the set timers one by one.
• To check the power-off time, press the ▲ key.
• Press the + or – key to check the power-off time of the set timers one by one.
• To delete selected setting, press the C key.
▪ Activation timer
• Press the TIMER ON / OFF key to activate the timer function.
• NOTE: When the timer is active, the heating level must be manually selected. If the heater function is not
selected; only the flame effect goes on at the set power-on time.
▪ Automatic heating mode
• Press the IC key to activate automatic heating mode. The AUTO icon appears on the display.
• When the automatic heating is turned on, the heater automatically changes the heating level depending on the
set temperature and the ambient room temperature.
To Next Page
Loading...
