S.p.A. BL 45
2
INDEX
◊ INTRODUCTION
◊ IDENTIFICATIONS AND TECHNICAL
SPECIFICATIONS
◊ INSTRUCTIONS FOR MOTORISED HOE
ASSEMBLY
◊ GENERAL SAFETY REGULATIONS
◊ STARTING AND STOPPING
◊ USE AND ADJUSTMENT
◊ SERVICING
◊ TESTS FOR CE REGULATIONS
◊ WARRANTY
◊ CE CERTIFICATION
INTRODUCTION
Dear user,
Thank you for preferring BENASSI.
The top performance and the easy use of our machine will give you any satisfaction.
♦ This machine is the result of a long experience working at the top quality standard and using first quality material.
♦ Carefully using and servicing this machine, you will certainly get satisfactory performances for a long time.
♦ Please read very carefully this booklet before using your motorised hoe.
♦ Pay special attention to the instructions marked out by the following sign
ATTENTION
♦ Failure to comply with these instructions may result insidious or even fatal injury.
KEY TO MACHINE PARTS
1- Transport wheel
2- Tillers
3- Tiller protection
4- Braking spur
5- Belt cover
6- Clutch lever forward drive
7- Throttle lever
8- Clutch lever backward drive
9- Handlebar adjustments
10- Air filter
11- Fuel tank cap
12- Choke lever
13- Recoil start
14- Oil cap
To Next Page
Loading...
