FT 155
4
IDENTIFICATION AND TECHNICAL CHARACTERISTICS
For the engine features see the engine instruction booklet delivered with the
machine.
• Fuel for 4-stroke motor: unleaded petrol
• Start-up with self-winding cord
• Dry air filter
• 4-STROKE MOTOR OIL : AGIP DIESEL SIGMA SAE 30 0.6 l
• 1 forward gear with drive control lever on the handlebar
• Blade engagement lever on the handlebar
• Cutting height adjustment
For machine identification (serial number, motor, weight, power) read the data plate as shown in the photo. See Fig. 1, Ref. "A".
-Fig. n°1- -Fig. n°2-
PACKING AND TRANSPORT
◊ WIDTH: 61 cm
◊ DEPTH: 110 cm
◊ WEIGHT: 63 cm
⇒ The machine is delivered in its own packing.
⇒ After unpacking the high grass mower, fasten the handle to the handle support using the screws provided.
⇒ For transporting convenience, the handle may be disassembled by unscrewing the two knobs (Ref. "A" Fig. 2).
⇒ The machine is delivered with oil in the gearbox.
SAFETY RULES
• Please read carefully the operation and maintenance manual supplied with the machine.
• Persons under 16 years of age are prohibited from operating the machine.
• The operator is responsible for all damages as the machine is under his control.
• Empty the tank of petrol should the machine be transported.
• Should the machine be left unattended, ensure that it cannot start up again.
• Never work in bare feet. Wear sturdy shoes and long pants.
•
Before using the machine, inspect the area to be cut and remove sticks, stones and any other extraneous objects.
• Before starting the machine, ensure that there is a 10 meter radius of free space around the machine, using the front
protection guard. Without this guard, the the free field should be increased to 50 mts
• Dry petrol leaks.
• Please check the oil regularly.
To Next Page
Loading...
