5073-039
20V MAX BRUSHLESS GRASS TRIMMER
4
SYMBOL MEANING
Always wear non-slip gloves that t properly to protect your hands
and to help you grip the tool.
Always wear sturdy clothing with long sleeves and long pants.
Never operate the tool while wearing shorts, short sleeve shirt or
while shirtless.
Always wear non-slip safety boots to prevent foot injuries and slipping
that could cause loss of control of the tool.
To avoid electrical hazards, re hazards or damage to the tool,
use proper circuit protection.
This tool is wired at the factory for 120 V AC operations.
It must be connected to a 120 V AC, 15 A circuit that is protected by
a time-delayed fuse or circuit breaker. To avoid shock or re, replace
power cord immediately if it is worn, cut or damaged in any way.
WARNING: Ventilation openings in batteries and chargers must
always be open to allow cooling air to circulate freely. Air vents that
are blocked, restricted or covered may result in the battery or charger
overheating. Overheating may lead to damage to the tool or cause a
re, resulting in possible serious injury.
5073-039f EnProdManual P.indd 45073-039f EnProdManual P.indd 4 2020-12-17 1:59 PM2020-12-17 1:59 PM
To Next Page
Loading...