23
MAINTENANCE
GENERAL
WARNING: When servicing, use only identical replacement parts.
The use of any other part may create a hazard or cause product damage.
DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust, oil, grease, etc.
WARNING: Do not allow brake uids, gasoline, petroleum-based products,
penetrating oils, etc. to come into contact with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
DO NOT abuse power tools. Abusive practices can damage the tool
and the workpiece.
WARNING: DO NOT attempt to modify tools or create accessories. Any such
alteration or modication is misuse and could result in a hazardous condition
leading to possible serious injury. It will also void the warranty.
LUBRICATION
All of the bearings in this tool are lubricated with a sucient amount of high-grade
lubricant for the life of the unit under normal conditions. Therefore, no further
lubrication is required.
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
To preserve our natural resources, please recycle or dispose of batteries properly.
The batteries accompanying this tool may contain chemicals and metals that are
harmful to the environment. Never dispose of rechargeable batteries in your
normal household garbage or in landll sites, because they will add to the
pollution of the environment.
Consult your local waste authority for information regarding available recycling
and disposal options.
WARNING: Upon removal of the battery pack, cover the terminals of the
battery pack with electrical tape or heavy-duty tape. Never touch both terminals
with metal objects or parts, because a short circuit may result. Keep away from
children. Do not attempt to destroy or disassemble battery pack or remove any
of its components. Rechargeable batteries must be recycled or disposed of properly.
Failure to comply with these warnings could result in re and serious injury.
5073-039f EnProdManual P.indd 235073-039f EnProdManual P.indd 23 2020-12-17 1:59 PM2020-12-17 1:59 PM
To Next Page
Loading...