EasyManua.ls Logo

Benchmark 5122-002 - Maintenance and Storage

Benchmark 5122-002
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
WARNING: Mower blades are sharp and can cut. Wear gloves, and use
extra caution. Never place hands, fingers or feet inside the reel. Although a
motor does not power this mower, when the wheels turn the reel spins and can
cut.
MAINTENANCE AND STORAGE
1. Clean the mower with a brush or rag after each use.
2. Store the mower in a location that is dry and not accessible by children.
3. Before each use, ensure all mounting components (i.e., screws, bolts, nuts etc.)
are tight so that the mower can be safely operated at all times.
4. Replace excessively worn or damaged parts immediately.
5. To ensure that you enjoy your mower for many years to come, clean and
lubricate all moving parts and ensure the blades are sharp. Lubricate the axle and
pinion with a light film of wheel bearing grease.
6. Keeping your mower in good condition not only ensures a long lifespan and high
performance, but also enables the mower to thoroughly cut your grass with
minimal eort.
7. The blade on the mower spindle is subject to more wear and tear than any other
component of the unit. Check the condition of the blade on the mowing spindle at
regular intervals and make sure that it is tightly fastened .
The mower can cut grass up to approx. 4” (10 cm) in length.
• When starting the mowing session (and when mowing over freshly laid sod), it is
advisable to set the cutting height relatively high, then gradually work your way
down.
• For optimum results, mow your lawn on a weekly basis. Grass blades grow
thicker, faster, and are more resilient when their stems are consistently kept short
(unless you live in very dry conditions and do not frequently water).
• Always mow the lawn when is dry.
WARNING: Never operate the mower in wet grass. Always be sure of
your footing. A slip and fall can cause serious personal injury.
• To ensure that your lawn has a clean, even look to it when you’re finished, mow
in straight paths at walking pace. The cutting swaths should always overlap each
other by a few centimeters to avoid unsightly strips of grass.
Operation

Related product manuals