26
Check fuel
line replace if
necessary
√ √
Lubricate
wheel axles
√ √ √
Check spark
plug
√ √
Change engine
oil
√ √ √ 2,3
Clean air filter
replace if
necessary
√ √ 4
Replace spark
plug
√
Clean
combustion
deposits from
cylinder,
piston, and
valves
√
Check
transmission
oil
√ √
CAUTION
IMPORTANT NOTES ABOUT MAINTENANCE SCHEDULE:
1. Re-check tightness of all fasteners after first 2 hours of initial use.
2. Change engine oil after first 5-8 hours of initial use.
3. Change oil every 25 hours if operating under heavy load or in high temperatures.
4. Clean air filter every 10 hours if operating under dusty conditions
WARNING
Use only GENUINE replacement parts. Other parts may damage the unit or result in
injury.
SERVICING THE TILLER
The following information will help you make the necessary checks and perform the
procedures required to follow the normal care recommendations made for your tiller
unit. If you prefer, your local authorized dealer can make these checks and perform
the required procedures for you.
To Next Page
