5140-014
14” 40V MAX CORDLESS
& BRUSHLESS GARDEN TILLER
16
FIG. 7
FIG. 8
Starting the Tiller
Rotating tines may cause serious injury. The tines will continue to turn for a few
seconds.
Components (i.e. motor housing, gear box, etc.) on the machine may cause burns.
Allow the
machine to cool before handling.
Operating Tips
• Before each use, check the product, the batteries, and any other accessories for
damage. Do not use the product if it is damaged or shows wear.
• Double check that the accessories and attachments are properly fitted.
• Always hold the product by its handles. Keep the handles dry to ensure a secure
grip.
• Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and damage
the product.
• Switch the product o immediately if you are disturbed while working by other
people entering the working area. Always let the product come to a complete stop
before averting your attention.
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the task at hand and have full control over the product.
In some jurisdictions, regulations define restrictions for use of such products,
including the times and days when operation is permissible. Ask your community for
detailed information and observe these regulations in order to preserve a peaceful
neighborhood and avoid violating any local ordinances.
WARNING: after the tool has been switched OFF. Do not touch the rotating
tines. Contact with hot tines can cause serious injury.
WARNING:
ON/OFF
bail
Safety
lock
button
Upper handle
1. Open the battery compartment
cover
and slide both batteries in until they
click to lock it into position, then
close the battery compartment
cover (Fig. 7).
2. To turn the tool ON, press and hold
the safety lock button while squeezing
the ON/OFF bail. Once the tool is
running, release the safety lock
button (Fig. 8).
3. To switch OFF, release the ON/OFF
bail (Fig. 8).
To Next Page
