13
2. Be very careful when changing direction on slopes.
3. Stop the blade when crossing terrain other than lawns and when the lawn mower
is transported to and from the work area.
4. Do not use the lawn mower when faulty guards are without fitted safety devices,
such as, for example, the grass bag.
5. Do not modify the engine adjustments and do not tamper to increase the engine
speed. If the speed of the engine is too high this could cause personal injuries.
6. Disengage the blade and drive control before starting the engine.
7. Hands and feet must be kept away from the blade. Always keep away from the
grass unloading opening.
8. Reduce the throttle during engine run-out. If the engine is provided with a shut-
off valve, cut off the fuel when you have finished mowing.
9. Watch out for traffic when crossing or near roadways.
10. Never direct discharge of material toward bystanders nor allow anyone near the
machine while in operation.
Before leaving the driving seat:
1. Place the gear shift in neutral “N” and engage the parking brake.
2. Disengage the blade and lower the blade deck.
3. Stop the engine and remove the key.
Before carrying out any inspection, cleaning, and servicing
operations on the machine, stop the engine, take out the ignition key and follow the
instructions in the operator’s manual.
The blades are sharp, risk of a serious injury!
Before carrying out any inspection, cleaning, and repair operations on the cutting
parts, stop the engine and take out the ignition key. Next, disconnect the spark plug
wire and keep the cap away from the plug to prevent accidental starting.
The blades are sharp, risk of a serious injury!
1. Wait for the blade and all the moving parts to come to a halt before touching
them. The blade will continue turning for some time after switching off the engine
or disabling the blade control.
2. Disengage the blade during transport and every time it is not used.
Stop the engine, remove the key, and disengage the blade:
1. Before leaving the machine.
2. Before filling up with petrol.
To Next Page
Loading...
