Benchmark 5150-201 - Maintenance

46
11. Be very careful when mowing near bushes or curbs as these could distort the
horizontal position of the cutting deck and damage its edge as well as the
blades.
8. MAINTENANCE
SAFETY RECOMMENDATIONS
Before cleaning or doing maintenance work, take out the ignition key
and read the relevant instructions. Wear adequate clothing and work gloves
whenever your hands are at risk.
Never use the machine with worn or damaged parts. Faulty or worn-out
parts must always be replaced and not repaired. Only use original spare parts: Parts
that are not of the same quality can damage the equipment and affect your safety
and that of others.
Never dispose of used oil, fuel, batteries, or other pollutants in
unauthorized places!
Operation
Hours
Completed (Date or Time)
1. MACHINE
1.1 Check engine oil
Before
each
use
1.2 Tires pressure check
Before
each
use
1.3 Safety checks and
controls
Before
each
use
1.4 Check damage on
products
Before
each
use
1.5 Cleaning product
After
each
use
1.7 Check fasteners and
sharpness blades
Each 25
hours