Uneven or poor
cutting results
Sharpen or replace mowing blades
2. Different air pressures
in tires on left and right
side.
Check the tire pressure (par. 5.3.2).
3. Cutting deck
adjustment.
Check deck adjustment (6.3 or
Contact your Dealer or Service
center).
4. Long and/or wet grass.
Adapt cutting level and driving
speed to the mowing conditions.
5. Travelling speed too
high.
Set to a lower travelling speed.
6. Grass stuck under
cutting deck.
Cleaning inside the deck properly
(Use a suitable accessory to access
the cleaning of the cutting deck).
7. Cutting drive belt
Slipping.
Replace the cutting drive belt.
If problems persist after having performed the above operations, contact your
Dealer or an authorized Service center.
MACHINE DIMENSIONS
To Next Page
Loading...
