Benchmark BCT24M - Page 49

49
Operation
Hours
Completed (Date or Time)
1. MACHINE (Continued)
1.8 Check transmission
belt
Each 25
hours
1.9 Check blade belt
Each 25
hours
1.10 Bolt and screw
check
Each 25
hours
1.11 General Lubrication
(3)
Each 25
hours
1.12 Blade replacement
Each
100
hours
1.13 Maintenance review
(made by Authorized
Dealer or Service Center)
Every
year
2. ENGINE
2.1: First Oil change
Each 20
hours
2.2 Engine oil change
Each 50
hours
2.3 Air filter cleaning
Each 50
hours
2.4 Check and adjust
Spark Plug
Each
100
hours
2.5 Fuel tank and fuel
filters cleaning
Each
100
hours
2.6 Air filter replacement
Every
year
2.7 Spark plug
replacement
Every
year
The above table is here to help you maintain your machine’s safety and
performance. It shows the main maintenance and lubrication operations and their
frequency. Use the boxes to the right to write the date or how many operating hours
the work was carried out after.