What to do if my Benchmark Portable Generator engine does not start?
If your Benchmark Portable Generator's engine won't start, several factors could be at play. First, make sure the start/stop lever is pressed. If that's not the issue, the spark plug may be defective and need replacement. Check if the fuel tank is empty and refill if necessary. Lastly, the engine might be flooded, in which case you should remove the plug and dry it.
Why is my Benchmark BM1740 Portable Generator so loud and vibrating heavily?
Excessive noise and vibration in your Benchmark Portable Generator can stem from several issues. Begin by checking all screws and blade fasteners to ensure they are properly tightened. A loose connection in the battery circuit could also be the culprit, so inspect and clean the wiring connections. If the blade is unbalanced, consider replacing it.
Why is my Benchmark Portable Generator engine running unsteadily?
An unsteady engine in your Benchmark Portable Generator could be due to a soiled air filter or spark plug. Try cleaning the air filter and spark plug to resolve this issue.
Essential guidelines for safe operation, including pre-operation checks and hazard awareness.
Specific safety precautions for operating the lawn mower, including slope handling and avoiding hazards.
Safety measures to follow during maintenance, emphasizing engine shutdown and proper handling of parts.
Detailed instructions on how to check and add engine oil, including capacity and type recommendations.
Information on the electric start battery, including warnings, charging, installation, and removal procedures.
Procedure to verify the engine oil level is adequate before starting the mower.
Instructions for checking the fuel level in the tank and adding gasoline safely.
Step-by-step guide for starting the lawn mower using the manual recoil starter.
Instructions for starting the BM2050E model using the electric start button.
Instructions on how to engage and use the self-propelled system for effortless mowing.
Step-by-step guide for draining old oil and refilling with fresh engine oil.
Common engine issues like vibration, starting failures, and unsteady running with solutions.
Solutions for uneven mowing results and insufficient grass bag filling.
Essential guidelines for safe operation, including pre-operation checks and hazard awareness.
Specific safety precautions for operating the lawn mower, including slope handling and avoiding hazards.
Safety measures to follow during maintenance, emphasizing engine shutdown and proper handling of parts.
Detailed instructions on how to check and add engine oil, including capacity and type recommendations.
Information on the electric start battery, including warnings, charging, installation, and removal procedures.
Procedure to verify the engine oil level is adequate before starting the mower.
Instructions for checking the fuel level in the tank and adding gasoline safely.
Step-by-step guide for starting the lawn mower using the manual recoil starter.
Instructions for starting the BM2050E model using the electric start button.
Instructions on how to engage and use the self-propelled system for effortless mowing.
Step-by-step guide for draining old oil and refilling with fresh engine oil.
Common engine issues like vibration, starting failures, and unsteady running with solutions.
Solutions for uneven mowing results and insufficient grass bag filling.
General| Rated Watts | 1700 |
|---|---|
| Fuel Type | Gasoline |
| Starting System | Recoil |
| Engine Type | 4-stroke, OHV |
| Outlet Types | 2x 120V 20A |
To Next Page
