The trimmer shield is connected to the trimmer base and it is used to
prevent debris from being thrown.
CONTROLS AND FEATURES
RECOIL STARTER
TRIMMER SHIELD
The control lever must be depressed to start the engine and rotation of
trimmer spindle assembly. Releasing the control lever stops the engine and
trimmer spindle assembly.
CONTROL LEVER
Figure 4-1.
The recoil starter is attached to the right side of the upper handle. Stand
behind the unit and pull the recoil starter rope to start the unit.
WARN I NG: This control lever is a safety device. Never attempt to
bypass its operations.
The trimmer line is attached to the spindle assembly and it is used to trim
grass, vegetation, undergrowth and weeds.
SPINDLE
TRIMMER LINE
Keep the flywheel screen free of grass clippings and debris at all times.
FLYWHEEL SCREEN
The spindle rotates the trimmer line.
12
To Next Page
