Need help?Do you have a question about the Benelli TORNADO NAKED TNT125 and is the answer not in the manual?
General| Displacement | 124.8 cc |
|---|---|
| Fuel System | Electronic fuel injection |
| Transmission | 5-speed |
| Final Drive | Chain |
| Height | 1025 mm |
| Seat Height | 780 mm |
| Wheelbase | 1215 mm |
| Ground Clearance | 160 mm |
| Weight | 124 kg |
| Max Power | 8.2 kW (11.1 Cv) @ 9500 rpm |
| Max Torque | 10 Nm (1.0 kgm) @ 7000 rpm |
| Ignition | TLI |
| Frame | Steel trestle |
| Front Suspension | Upside-down fork |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Front Tire | 120/70-12 |
| Rear Tire | 130/70-12 |
| Fuel Capacity | 7.2 liters |
| Engine Type | Single cylinder, 4-stroke, air cooled with oil radiator |
Owner's responsibilities and essential practices for safe motorcycle operation.
Importance of safety gear and warnings about carbon monoxide poisoning.
Guidelines for adding cargo and aftermarket parts.
Specifications for tires/rims and instructions for transporting the vehicle.
Identification of major components visible from the left side.
Identification of major components visible from the right side.
Illustration and labels for handlebar controls and instrument panel.
How to use the ignition key and secure the steering.
Detailed steps for locking and unlocking the motorcycle's steering.
Functions of the dashboard display, indicators, and warning lights.
Explanations of various meter readings and functions.
Detailed functions of left and right handlebar switchgear.
Operation of the clutch lever and gear shift pedal.
Operation of front and rear brakes, including the Combined Braking System.
Procedures for opening and closing the fuel tank cap.
Recommended fuel types and catalytic converter information.
Procedures for removing and installing the rider and passenger seats.
How to adjust the headlight beam and rear shock absorber preload.
Sidestand function and the vehicle's ignition circuit cut-off system.
Procedures for testing the ignition circuit cut-off system components.
Checks for fuel level, engine oil, and front brake system.
Verifying rear brake operation and clutch lever free play.
Inspecting throttle grip, control cables, and drive chain condition.
Checking tire condition, tread depth, and wheel integrity.
Inspecting fasteners, lights, switches, and sidestand system.
Step-by-step procedure for starting the motorcycle engine.
Proper shifting techniques and tips for reducing fuel consumption.
Guidelines for the engine break-in period and safe parking practices.
Using the tool kit and understanding the general maintenance chart overview.
Procedures for checking, gapping, and replacing spark plugs.
Steps for checking and changing engine oil and the oil filter.
Replacing the air filter and checking engine idling speed.
Checking tire condition, pressure, tread depth, and valve clearance.
Adjusting clutch lever free play and checking brake lever free play.
Checking brake light switches, pads for wear, and brake fluid levels.
Checking drive chain slack and adjusting tension.
Procedures for cleaning and lubricating the drive chain and its components.
Lubricating control cables, pedals, and lever pivots.
Checks for front fork condition, steering operation, and wheel bearings.
Battery care, charging, and fuse replacement procedures.
Checking lights and using troubleshooting charts for common issues.
Special care for matte finishes and general cleaning procedures.
Instructions for short-term and long-term storage to prevent damage.
Key physical, weight, and engine technical data.
Specifications for fuel, braking, suspension, wheels, and tires.
Details on electrical system voltage, battery, bulbs, fuses, and wiring diagram.
Location and importance of VIN, engine serial number, and model label.
Information on diagnostic connectors and vehicle data storage.
To Next Page