Need help?Do you have a question about the Benelli TRK 702 and is the answer not in the manual?
General| Displacement | 698 cc |
|---|---|
| Bore x Stroke | 83 mm x 64.5 mm |
| Compression Ratio | 11.6:1 |
| Fuel System | Electronic fuel injection |
| Transmission | 6-speed |
| Final Drive | Chain |
| Seat Height | 825 mm |
| Fuel Tank Capacity | 20 liters |
| Engine Type | Liquid-cooled, 4-stroke, 2-cylinder |
| Maximum Torque | 68.2 Nm @ 6, 250 rpm |
| Front Suspension | Upside-down telescopic fork |
| Rear Suspension | Monoshock, adjustable |
| Front Brake | Dual discs |
| Rear Brake | Single disc |
| Front Tire | 110/80 R19 |
| Rear Tire | 150/70 R17 |
| Weight | 220 kg |
Owner's responsibilities for safe operation and proper riding techniques.
Guidelines for safe operation, visibility, and hazard avoidance.
Overview of handlebar controls, switches, and dashboard instruments.
Operation of the main switch for ignition and steering lock.
Detailed explanation of the digital display, including daytime and nighttime modes.
Instructions for navigating the multifunction display menu via handlebar buttons.
How to adjust display brightness, view info, and set the clock.
Steps for connecting the motorcycle's display to Android or Apple devices.
Explanation of left and right handlebar switch functions for lights, horn, etc.
Explanation of the Anti-lock Braking System operation, limitations, and warnings.
Steps to check fuel level, line, and refuel if necessary.
Steps to check engine oil level and for leaks.
Steps to check coolant level and for leaks in the cooling system.
Checks for front brake operation, fluid, pads, and hydraulic system.
Checks for rear brake operation, fluid, pads, and hydraulic system.
Checks for damage, tire condition, tread depth, and air pressure.
Step-by-step guide for starting the motorcycle's engine.
Explanation of the gear shifting process and its importance.
Guidelines and precautions for the initial engine break-in period.
Procedure for checking spark plug condition, gap, and replacement.
Detailed instructions for checking engine oil level and replacing the oil filter.
Procedure for checking coolant level and precautions.
Importance of tire condition, replacement, and safety.
Recommended tire air pressures for different loads and conditions.
Procedure for checking brake pad wear using indicators.
How to check brake fluid level and replenish if necessary.
Procedure for changing brake fluid, performed by a dealer.
Information on battery type, lead connections, and safety warnings.
Procedure for identifying and replacing blown fuses.
Introduction to troubleshooting and the importance of genuine parts.
Diagnostic flowcharts for starting issues and poor engine performance.
Steps to diagnose and resolve engine overheating issues.
To Next Page