Benelli TRK 702 User Manual

6 - 20
Periodic maintenance and adjustment
EN
6
Checking the brake uid level
Before riding, check that the brake uid is
above the minimum level mark.
Check the brake uid level with the top of
the reservoir level.
Replenish the brake uid if necessary.
Front brake
Front brake uid reservoir
Checking the front and rear brake pads
The front and rear brake pads must be
checked for wear at the intervals specied
in the periodic maintenance and lubrica-
tion chart.
Front brake pads
1
1. Brake pad wear indicator
Each front brake pad is provided with
wear indicators, which allows you to
check the brake pad wear without having
to disassemble the brake. To check the
brake pad wear, check the position of the
wear indicators while applying the brake.
If a brake pad has worn to the point that a
wear indicator almost touches the brake
disc, have a Benelli dealer replace the bra-
ke pads as a set.
Rear brake pads
1
1. Brake pad wear indicator
Each rear brake pad is provided with wear
indicator grooves, which allow you to
check the brake pad wear without having
to disassemble the brake.
To check the brake pad wear, check the
wear indicator grooves. If a brake pad has
worn to the point that a wear indicator
groove almost appears, have a Benelli de-
aler replace the brake pads as a set.

Benelli TRK 702 Specifications

General

Displacement	698 cc
Bore x Stroke	83 mm x 64.5 mm
Compression Ratio	11.6:1
Fuel System	Electronic fuel injection
Transmission	6-speed
Final Drive	Chain
Seat Height	825 mm
Fuel Tank Capacity	20 liters
Engine Type	Liquid-cooled, 4-stroke, 2-cylinder
Maximum Torque	68.2 Nm @ 6, 250 rpm
Front Suspension	Upside-down telescopic fork
Rear Suspension	Monoshock, adjustable
Front Brake	Dual discs
Rear Brake	Single disc
Front Tire	110/80 R19
Rear Tire	150/70 R17
Weight	220 kg