Benelli TRK 702 User Manual

For your safety – pre-operation checks
EN
4
4 - 2
• Check operation.
• If soft or spongy, have Benelli dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check uid level in reservoir.
• If necessary, add specied brake uid to specied level.
• Check hydraulic system for leakage.
Rear brake
ITEM CHECKS
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
Clutch
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Benelli dealer adjust throttle grip free play and lubricate cable and grip housing.
Throttle grip
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
Brake and shift
pedals
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
Drive chain
Wheels and tires

Benelli TRK 702 Specifications

General

Displacement	698 cc
Bore x Stroke	83 mm x 64.5 mm
Compression Ratio	11.6:1
Fuel System	Electronic fuel injection
Transmission	6-speed
Final Drive	Chain
Seat Height	825 mm
Fuel Tank Capacity	20 liters
Engine Type	Liquid-cooled, 4-stroke, 2-cylinder
Maximum Torque	68.2 Nm @ 6, 250 rpm
Front Suspension	Upside-down telescopic fork
Rear Suspension	Monoshock, adjustable
Front Brake	Dual discs
Rear Brake	Single disc
Front Tire	110/80 R19
Rear Tire	150/70 R17
Weight	220 kg