BENETEAU 331 - Tool Kit

BENETEAU 331 Page 11 of 73
Jan. 10, 2003
rev 02
TOOL KIT
A basic kit should consist of:
• Wrenches - adjustable, Metric and SAE open end, box, socket
• Hammers - large and small
• Knife - with marlinespike
• Screwdrivers - large and small, standard and Phillips
• Pliers - regular, cutting and needle nose, vise grips
• Wire cutter - capable of cutting standing rigging
• Hacksaw - with spare blades
SPARE PARTS
A basic kit should consist of the following:
• Standing and Running Rigging: Turnbuckles, monel seizing wire, clevis
and cotter pins, blocks, extra line, rigging tape, duct tape.
• Fasteners: Assortment of stainless steel screws, nuts, bolts, and washers
• Hose clamps.
• Electrical: Electrical tape, wire, crimps on lugs, spare navigation light
bulbs.
• Lubricating supplies: WD-40 and silicone grease.
• Engine: Check engine manual for spare parts, engine oil and transmission
fluid recommendations.
• Sails: Sail repair kit and sail slides.