Need help?Do you have a question about the Beninca CP.BULL5 ARC and is the answer not in the manual?
General| Number of Motors | 1 |
|---|---|
| Protection Class | IP54 |
| Motor power supply | 230 Vac |
| Power Supply | 230V AC ±10%, 50/60Hz |
| Operating Temperature | -20°C to +50°C |
| Humidity | 95% non-condensing |
Instructions for qualified installers, gate structure suitability, end-user information.
Hazards from packaging, children's access, capacity, safety devices, standards.
Requirements for omnipolar switch, differential switch, earthing, power disconnection.
Description of terminals, functions, and wire connections for the control unit.
Procedure for verifying connections after installation, including power cut-off and manual door movement.
Configuration of torque, forewarning, and braking time using DIP1 and push-buttons.
Procedure for setting braking points during opening and closing phases.
Procedure for adjusting torque using DIP1 and observing the DL2 LED indicator.
Compatibility with ARC transmitters and the need to store codes.
Procedure for storing transmitter codes in the receiver memory for Step-by-Step and pedestrian functions.
To Next Page
