Beninca RF - EC Declaration of Compliance; Technical Data; RF Mobile Safety Edges - Battery Power Specs; RF Mobile Safety Edges - Environmental & Frequency

EC Declaration of Compliance
Manufacturer: Automatismi Benincà SpA.
Address: Via Capitello, 45 - 36066 Sandrigo (VI) - Italy
This is to certify that:
The radio-transmitter/radio-receiver for movable sensitive safety edges RF-RF.SUN-SC.RF.
is compliant with the following regulations:
Directive on the electromagnetic compatibility: 89/336/CCE, 93/68/CEE
Directive on low voltage:73/23/CEE, 93/68/CEE
ETSI EN 301 489-3 V1.4.1 (2002)
ETSI EN 301 489-1 V1.4.1 (2002)
ETSI EN 300 220-3 V1.1.1 (2000)
EN12978
EN 954-1 CAT2
EN 12453
Benincà Luigi, Legal Officer.
Sandrigo, 07/07/2011.
TECHNICAL DATA
DEVICE FOR RF MOBILE SAFETY EDGES
Power supply 2 batteries, 1.5V, alkaline 2.7Ah
Max range in optimal conditions 100 m
Protection level IP 55
Operating temperature -20 °C / +70° C
Duration of batteries 3 years with 10 openings/day
Operating frequency 868 MHz
DEVICE FOR RF MOBILE SAFETY EDGES
Power supply
2 batteries 1.2 NiMh (1800mAh), AA rechargeable
Max range in optimal conditions 100 m
Protection level IP 55
Operating temperature -20°C / +70°C
Duration of batteries (without load) 150 days
Operating frequency 868 MHz
SUN SOLAR PANEL
Solar cell Amorphous silicon
Overall dimensions 43x185x12mm
Recharge current
30 mA with 50000 Lux (sun)
10 mA with 20000 Lux (changeable)
0,5 mA with 2000 (clwdy)
Recharge voltage 4.5V
Charge time 96h
8