Beninca RR.1WIV User Manual

L8542098
Rev. 09/05/00
RR.1WBV
RR.2WBV
RR.1WIV
RR.2WIV
Radioricevitori 433,92MHz mono/bicanale rolling-code
433.92MHz single/dual channel rolling-code radio receivers
1-/2-Kanal-Rolling-Code-Funkempfänger 433,92MHz
Récepteurs radio 433,92 MHz mono/bicanal à code variable
Radiorreceptores 433,92MHz mono/bicanal rolling-code
Odbiorniki radiowe 433,92MHz jedno/dwukanałowe rolling-code
Manuale istruzioni
Operating instructions
Betriebsanleitung
Livret d’instructions
Manual de instrucciones
Książeczka z instrukcjami
UNIONE NAZIONALE COSTRUTTORI
AUTOMATISMI PER CANCELLI, PORTE,
SERRANDE ED AFFINI

Beninca RR.1WIV Specifications

General

Brand	Beninca
Model	RR.1WIV
Category	Receiver
Language	English

Summary

Transmitter Memorization

Simplified Procedure

Step-by-step guide to record transmitters for the first channel on the receiver.

Remote Self-Learning

Memorize transmitters without receiver button P using hidden button on transmitter.

Programming Receiver Modes

Mode Selection and LED Signals

Details how to set programming modes using P button and interpret LED signals.

Times Mode Configuration

Pulse Mode and Timing

Configures channel timing from 1 sec to 10 min, with 1 sec switching as default.

Bistable Operation

Sets relay to change status on each pulse, accessed via mode 3 in Times submenu.

Memory Reset Procedure

Complete Memory Erasure

Steps to power cycle the receiver while holding P to erase all stored transmitters.

Technical Specifications

Frequency, Power, and Range

Lists operating frequency (433.92 MHz), power supply, and receiver range.

Channels and Relay Contact

Details the number of channels and the specifications for the relay contact.

Consumption and Temperature

Provides standby/active consumption figures and operating temperature range.