Need help?Do you have a question about the Beninca ONE2 WI and is the answer not in the manual?
General| Frequency | 433.92 MHz |
|---|---|
| Coding | Fixed code |
| Power supply | 12-24 V AC/DC |
| Operating temperature | -20°C to +70°C |
| Operating Voltage | 12-24 V AC/DC |
| Modulation | ASK |
Diagram illustrating the terminal connections for the ONE2 WI receiver, including channels, power, and antenna.
Diagram showing the terminal connections for the ONE2 WB receiver, detailing channels, power, and antenna inputs.
Step-by-step guide to record transmitters for channel 1, including LED indications.
Method for memorizing transmitters without using the receiver's P button, via a memorized transmitter.
Procedure for setting up channels and programming modes using the P button, indicated by LED signals.
Details on different programming modes (Memorise channel 1/2, Auto channels, Set times) and their corresponding LED indicators.
Options for setting pulse mode, selecting switching time, and setting bistable mode for receiver channels.
Mapping of LED blinks to specific switching times (1s to 10m) for timer functions.
Procedure to erase all stored transmitter memories using the P button and power cycle.
To Next Page
