Need help?Do you have a question about the Beninca ONE2 WB and is the answer not in the manual?
General| Frequency | 433.92 MHz |
|---|---|
| Number of Channels | 2 |
| Power Supply | 12-24 V AC/DC |
| Max Range | 100 m |
| Operating Voltage | 12-24 V AC/DC |
| Current Consumption | 20 mA |
| Operating Temperature | -20°C to +70°C |
| Weight | 50 g |
| Coding | Rolling code |
| Modulation | AM |
Notes on rolling code vs programmable code transmitters and how the first memorized transmitter sets decoding type.
Step-by-step guide to record transmitters for channel 1 using the 'P' button.
Method to memorize new transmitters using an already memorized transmitter's buttons.
Explanation of setting programming modes using the 'P' button and LED signals.
How to set channels for timed (1 sec to 10 min) or bistable operation using modes 4 and 5.
Explanation of how to select switching times by counting LED blinks in mode 2.
Procedure to erase all memorized transmitters by pressing and holding the 'P' button during power-up.
Specifications including frequency, power supply, range, channels, relay contact, and consumption.
To Next Page
